POWER AMPLIFIERS:

DJ-SYSTEMS TURNTABLES CD-PLAYERS DJ-MIXERS DJ-SOFTWARE HEADPHONES AMPS SPEAKERS LIGHTNING CASES / RACKS

QSC RMX 2450 Power Amp QSC reliability, big power, and cool design for mid-to-large halls. In the QSC RMX 2450 Power Amp, QSC has combined their rugged high-output designs with the latest circuit technology to deliver unmatched performance at a breakthrough price. RMX power amps require only 2 rackspaces and feature 1/4" TRS, XLR, and barrier strip balanced inputs; binding post and Neutrik Speakon outputs; front-mounted gain controls for easy access; independent and defeatable clip limiters; selectable low-frequency filters (30Hz or 50Hz) that protect speakers and increase headroom; signal and clip LED indicators; independent DC and thermal overload protection on each channel; variable-speed fan. ****** 500W at 8 ohms, 750W at 4 ohms, and 1,200W at 2 ohms. 1/4" TRS, XLR, and barrier strip balanced inputs. Binding post and Neutrik Speakon outs. Front-mounted gain controls. Defeatable clip limiters. Low-frequency filters. Signal and clip LEDs. Independent DC and thermal overload protection. Variable speed fan. American Audio VLP300 Power Amplifier Clean power and plenty of versatility highlight this bargain-priced amp! The American Audio VLP-300 delivers powerful performance with unmatched economy. Pumping out 150W RMS per channel at 4 ohms, 100W RMS per channel at 8 ohms, and 300W RMS mono at 8 ohms, the VLP-300 cranks out big wattage for the dollar. Frequency range is 20Hz-20kHz. TRS and XLR inputs, binding post and Speakon outputs. ****** Output Power: 150W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD / 100W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD / (Bridge Mode, Mono). 300W RMS @ 8 Ohms, 1K Hz, 1% THD. Total Harmonic Distortion: Less Than 0.1% (20Hz - 20kHz @ 8 Ohms). Frequency response: (+/-01db, @rated output Power, 8 Ohms): 20Hz-20KHz. Slew Rate: 15V per usec. Damping Factor @ 8 ohm: 260. Impedance: 20 Ohms balanced / 10 Ohms unbalanced. Cooling system: 2 individual fans. High/low pass filter. Input sensitivity selector. Ground lift. QSC GX3 Stereo Power Amplifier Maximum performance at a modest price plus flexible I/O. The GX3 Stereo Power Amplifier from QSC is ideal for professional entertainers who require maximum performance and portability on a limited budget. QSC designers have optimized output and appearance of the GX3, while reducing raw material cost and weight. The rackmount GX3 power amp is ideal for speakers in the 300 watt (Program) range and supplies maximum possible power to 4 ohm and 8 ohm loads. The GX3 uses the latest evolution of the QSC Grounded Collector output system, for optimum cooling of the critical power transistors. A true Class B biasing system combines maximum thermal efficiency with excellent audio performance. ****** Power levels matched to the most popular speakers used by entertainers. Optimized for maximum real-world headroom into 4 and 8 speaker systems. Inputs: XLR, 1/4" TRS and phono input connectors for compatibility with any source. Outputs: Speakon® combo accepts, 1/4" (TS) plugs or Speakon 2-pole and 4-pole plugs (connects 2 poles only). Binding posts support all other speaker wiring systems.. Minimum depth chassis (10.1"/257 mm) fits in compact, inexpensive effects racks. Lightweight — less than 26 lbs (12.5 kg). Detented gain controls for precise setting and matching of sensitivity. GuardRail™ automatically protects the amplifier and loudspeakers from damage due to temperature rise or overdrive without shutting down the show. Front panel LEDs monitor Power, Signal and Clipping. Subwoofer/Satellite crossover built-in. < Crown XLS 602D Power Amplifier Crown remains at the front of the power amp pack with their XLS Series! 840W/ch @ 2 ohms, 600W/ch @ 4 ohms, 380W/ch @ 8 ohms, 1,680W bridged mono @ 4 ohms, 1,200W bridged mono @ 8 ohms. Designed to provide the quality, power, and reliability you expect from other Crown amps with many of the same controls and features for a much friendlier price. Features sophisticated protection circuitry (from shorted, open, or mismatched loads, input and high frequency overloads), 5-way fault indicator, red LED on each channel that turns on when distortion becomes audible, green signal-present LED that flashes when the level is extremely low (indicating cabling problems), and detented level controls. Mode select switch for stereo or bridged; 3-speed fan; and choice of 1/4", XLR, and barrier strip jacks; all in a rugged steel chassis designed to handle serious road use. ****** Features sophisticated protection circuitry. 5-way fault indicator. Red peak clip LED on each channel. Green signal-present LED that flashes when the level is extremely low. Detented level controls. Mode select switch for stereo or bridged. 3-speed fan. XLR inputs; touchproof binding post and Speakon© outputs. All in a rugged steel chassis designed to handle serious road use. 3-year no-fault warranty. Mackie FR 1400 2-Channel Stereo Power Amplifier Pro-level Mackie power at a very affordable price! The Mackie FR 1400 is a professional-level stereo power amplifier with a high-power design. The FR 1400 power amp has independent defeatable limiter protection on each channel and a subsonic filter for maximum amplifier efficiency. The Mackie Fast Recovery circuit reduces distortion for ultra-low noise. The Mackie FR 1400 also has XLR and 1/4" inputs with Speakon© and binding post outputs in a robust, impact-resistant, all-steel 2U rackmount chassis. ****** Stereo output: 800W @ 2 ohms, 450W @ 4 ohms, 310W @ 8 ohms. Mono output: 1400W @ 4 ohms, 900W @ 8 ohms. Professional stereo power amplifier with high-power / ultra low-noise design. Fast Recovery circuitry reduces distortion at the edge of clipping and beyond. Available in three distinct models:. Independent defeatable Limiter protection per channel. Subsonic Filter for maximum amplifier efficiency. XLR and 1/4" input connections. Speakon© and Binding Post output connections. Robust, impact-resistant, all-steel 2U rackmount chassis. 3-year full warranty. Crown XTi 1000 Power Amplifier Speaker presets, an LCD screen, and a universal power supply! 700W/ch @ 2 ohms, 500W/ch @ 4 ohms, 275W/ch @ 8 ohms, 1,400W bridged mono @ 4 ohms, and 1,000W bridged mono @ 8 ohms. The XTI Series of Crown amplifiers are professional tools designed and built for portable PA applications. All are rugged, lightweight, and feature an LCD screen with DSP speaker presets for crossover frequencies, EQ, limiting, delay, a subharmonic synthesizer. Other features include a switch-mode universal power supply, useful function indicators, proportional-speed fan assisted cooling, XLR inputs, Speakon©, and binding-post outputs, short-circuit protection and more. ****** Integrated proprietary DSP with LCD front panel display. Accurate, uncolored sound with very low distortion. Advanced protection circuitry. Extremely versatile, handling a wide range of speaker impedances and outputs. Switch-mode universal power supply. Speaker presets for crossover frequencies, EQ, limiting, and delay. 2U rack spaces. Under 17 pounds. Speakon© and binding post outputs, XLR inputs and loop-thrus. Comprehensive LED status per channel. 3-year, no-fault, fully-transferable warranty. American Audio VLP-1500 Power Amplifier Big-time power that won't drain your wallet! The American Audio VLP-1500 gives you power to spare at a stunningly low price. The VLP-500 is rated at 750W RMS per channel at 4 ohms, 500W RMS per channel at 8 ohms, and 1,500W RMS bridged mono at 8 ohms. Frequency range is 20Hz-20kHz. TRS and XLR inputs, binding post and Speakon outputs. ****** Output Power: 750W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD / 500W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD / 1,500W RMS @ 8 Ohms, (Bridge Mode, Mono) 1K Hz, 1% THD. Total Harmonic Distortion: Less Than 0.1% (20Hz - 20kHz @ 8 Ohms). Frequency response: (+/-01db, @rated output Power, 8 Ohms): 20Hz-20K Hz. Slew Rate: 15V Per usec. Damping Factor @ 8 Ohm: 300. Impedance: 20 Ohms balanced / 10 Ohms unbalanced. Cooling System: 2 indivdual fans. Special Features: High/Low Pass Filter / Input Sensitivity Selector / Ground Lift / Limiter. High/low pass filter. Input sensitivity selector. Ground lift. Yamaha P7000S Dual-Channel Power Amp Pro-quality power in a wide range of configurations. Perfect tuned via YS processing for use with the popular Club Series speakers. Yamaha's exclusive EEEngine technology for high performance with exceptional efficiency. XLR and 1/4" TRS inputs. Neutrik Speakon, phone plug, and 5-way binding post outputs. Sweepable high and low pass filters. Variable speed fan. Delivers 2 x 700W @ 8 ohms, 2 x 950W @ 4 ohms, and 1,900W @ 8 ohms bridged. Peavey PV 1500 Power Amp All the features and proven reliability. The PV1500 features Peavey's patented DDT distortion detection technique that virtually eliminates distortion. It also features Peavey's patented V-cooling design, which cools the power transistors more evenly than traditional heat-sink designs. 2-rackspace chassis. Peavey PV 1500 Power Amp Features: Stereo Mode: 4 ohms: 500W RMS x 2 Stereo Mode: 8 ohms: 300W RMS x 2 Bridge Mode-Mono: 8 ohms: 1000W RMS Inputs: XLR, 1/4 inch and barrier strip Detented input gain control Binding post and Speakon output connectors Separate Speakon mono bridge output Mode switch for stereo or bridge operation Low-cut filter switch for 40Hz low cut filter Thru/low output jacks and high output jacks LED indicators for input signal, DDT and power Peavey's famous DDT compression system Total Harmonic Distortion: Less than 0.03% 20Hz to 20kHz, 10dB below rated power in stereo mode both channels driven Frequency Response: 20Hz to 20kHz Damping Factor: greater than 300 Hum and Noise: 100dB Rackspaces: 2U Behringer EuroPower EP2500 Power Amp Designed to perfectly complement EuroLive speakers. Toroidal transformers. Ultrareliable Toshiba/Fairchild high-power transistors. Independent channel limiters. Selectable low-cut filters (30 or 50Hz). XLR and 1/4" TRS inputs. Speakon and binding post speaker outputs. Capable of parallel and bridged mono operation.