CYMBAL STANDS, SNARE STANDS and DRUM RACKS:

ACOUSTIC DRUM KITS ELECTRONIC DRUMS CYMBALS CYMBAL STANDS / RACKS DRUM HEADS HARDWARE, ACCESSORIES

Ludwig Accent Custom Snare Drum Stand Solid support from the name drummers trust. Heavy-duty, low-profile snare drum stand features a sure-grip snare basket, large serrated adjustment knob, and a secure tilt mechanism, plus standard Accent CS Series Custom Hardware features. ****** Sure-grip snare basket. Large serrated adjustment knob. Secure tilt mechanism. Low profile. Double-braced legs. Rubber crutch feet. Heavy-duty construction. Rubber snare basket grips. Collar clamp height adjustment. Nylon-lined inner tubes (Top 1.5"). Form fitted wing screws. Embossed with Ludwig logo. 1" base, 7/8" middle tubes, 5/8" upper tubes. Sound Percussion Drum Hardware Pack Great value in essential hardware. This Sound Percussion 4-pack of drum hardware features double-braced hardware with ratchet tilters and includes a hi-hat stand, snare stand, bass drum pedal, and straight cymbal stand. ****** Hi-hat stand. Snare stand. Bass drum pedal. Straight cymbal stand. Pearl Export 800 Series Hardware Pack Reliable, functional Export quality and features. The Pearl Export drum hardware pack includes an S-800W snare stand, BC-800W boom stand, C-800W cymbal stand, and H-820W hi-hat stand-all of which feature sturdy double-braced legs. The H-820W hi-hat features an Eliminator-style footboard and UltraGrip wingnuts and wingbolts. The P-120P pedal features a chain drive, an Eliminator-style footboard, DuoBeat beater that allows the choice of plastic or felt faces for hard or soft attack, and an adjustable beater angle. ****** S-800W snare stand with double-braced legs. BC-800W boom stand with double-braced legs. C-800W cymbal stand with double-braced legs. H-820W hi-hat stand with double-braced legs, an Eliminator-style footboard, and UltraGrip wingnuts and wingbolts. P-120P pedal with a chain drive, an Eliminator-style footboard, DuoBeat beater, and an adjustable beater angle. Gibraltar 5600 5-Piece Hardware Pack A complete rock-solid set from the hardware specialists. Hardware pack includes snare stand, hi hat stand, boom stand, Straight cymbal stand (except 9600 Series which contains a total of 2 boom stands), and single chain drive bass drum pedal with rock plate. Gibraltar Rack Starter Pack with Curved Wings The Gibraltar Rack Starter Pack lets you customize your drum kit! Gibraltar's Rack Starter Pack contains everything you need to build a rack! You can add-on or customize your rack set up with hundreds of Rack Factory options. The GRSP-CW Curved Rack features 2 curved wings that allow you to position percussion on either side of you, 2 cymbal boom arms, and 4 multiclamps that can hold tom arms or cymbal boom arms. The curved rack bars allow instruments and accessories to be placed closer to you within easy reach. ****** Basic Curved Rack. (2) Curved Wings. (2) Cymbal Boom Arms. (4) Multiclamps. Pacific Drums by DW CB900 Boom Cymbal Stand Double-braced legs. Rubber wing screws. Insulated tube clamps. Memory locks. Pearl B-1000 Boom Cymbal Stand A better boom! Features a newly designed Uni-Lock tilter with a built-in cowbell post, topped off with reversible cymbal cup that can be used to control the cymbal range of motion. A quick-release nut makes cymbal changes super fast while a new boom tilter with form-fit stop lock provides dependable angles. A die-cast pipe joint using a nylon bushing prevents unwanted noise from metal-to-metal contact within the tube and parallel double-braced legs keep everything planted securely via the new vibration-absorbing rubber feet. ****** The B-1000 Uni-Lock Tilter Boom Cymbal Stand is loaded with upgrades and improved features such as the WingLoc Quick Release Wingnut, reversible seat cup, built-in cowbell rod, improved boom tilter, improved die cast pipe joints, no-rattle tubes, parallel double braced legs, improved rubber tips & UltraGrip wingnuts/wingbolts. DW 5700 Heavy-Duty Straight/Boom Cymbal Stand Puts your cymbal right where you want it. The DW Drums 5700 Heavy-Duty Straight/Boom Cymbal Stand is a heavy-duty, convertible stand with the features pros demand: Fine-tooth tilter with captive wing nut, integrated memory locks on all tube joints for quick, precise setup. Full-size, heavy-duty 1-1/8" double-braced tripod base ****** Convertible, heavy-duty stand equipped with a fine-tooth tilter and captive wing nut. Memory locks on all tube joints. Full-size, heavy-duty double-braced tripod base. Tama Stage Master Double-Braced Boom Cymbal Stand A boom and straight stand in one! The HC33BW Stage Master Boom Cymbal Stand from Tama features a boom/straight convertible tilter, so if there's no room for a boom, simply convert to a straight stand! The boom arm stores neatly inside the upper tube. The M8 threaded rod is also thicker to withstand the hardest hitters. A new round-shaped Cymbal Mate can be spun easily with just a flick of the finger, but thanks to non-threaded sections on both the tilter and the Cymbal Mate, the Cymbal mate won't spin off the top of the tilter during normal play. You can choose two Cymbal Mate positions for ride or China cymbals for a looser or tighter fit. Are cymbal stands just for supporting cymbals? Tama thinks that cymbal stands are also musical instruments. All Tama cymbal stands in the Roadpro and Swingstar lineups were designed with the elimination of stand noise a top priority. A special rubber cap at the end of the upper tube eliminates swaying and rattling, and a special nylon sleeve underneath the die-cast joint of the base section further reduces swaying. The cymbal bottom protects the cymbal's center hole from the tilter's shaft and threads. If part of the nylon sleeve wears out, you can continue to use the cymbal bottom by turning it upside down. This cymbal stand has a 15-3/4" (400m) boom arm length, 25.4mm-diameter base section tubing, and features double-braced legs. ****** Boom/straight convertible tilter. Reversible bottom. Cymbal Mate. Noiseless design. 25.4mm-diameter base section tubing. Boom arm length: 15-3/4" (400m). Double-braced legs. Tama HH905 Iron Cobra Lever-Glide Hi-Hat Cymbal Stand The Tama HH905 Iron Cobra Lever-Glide Hi-Hat Cymbal Stand is made to be noiseless. Gives you fast action, incredible sensitivity and it's easy to adjust. Pacific Drums by DW HH700 Hi-Hat Stand Double-braced. Lightweight for easy transport. DW 9702 Heavy Duty Multi Cymbal Stand Almost limitless setup options. The 9702 Dual Cymbal Multi-Stand is yet another innovation designed to give drummers almost limitless setup options. This versatile stand features a dual-ratchet boom, mega-tripod base, heavy-duty 1-1/4" tubing, toothless tilters, TechLock, and DW's patented, adjustable cymbal seat. With the 9702, less hardware is needed to accomplish the same task without sacrificing stability. DW 9702 Heavy Duty Multi Cymbal Stand Features: Dual ratchet boom Quick-release ratchet Mega tripod base The Techlock secondary drum key locking system guard against slippage due to vibration during transport or play. Plastic tube insulators inside the heavy gauge tubing Hinged memory locks at tube joints, cymbal arms, and tripod leg assemblies Pearl S1000 Snare Stand New, improved design. The redesigned S1000 Snare Stand features a Gyro-Lock tilter, air-suspension tips, new basket design, new longer center shaft, new angle adjustment design, die-cast pipejoint, new parallel double-braced legs, new rubber tips, and UltraGrip wingnuts and wingbolts. ****** Provides rattle-free performance thanks to a nylon bushing to prevent metal-to-metal contact. Parallel double braced legs prevent wobble and oversized rubber feet keeps everything firmly planted. Pearl DR-503 ICON 3-Sided Drum Rack Solid, secure, and priced to ROCK! DR-503 ICON 3-Sided Drum Rack system provides infinite and independent adjustment to any position on its 34"-long legs. Set-and-forget memory clamps allow quick and repeatable set ups without tools. The T-style feet are very stable. Includes front and 2 side sections. Equipped with 7/8" tom and cymbal holders on each front leg. All rack bars are 36" for compact storage and easy transport. Includes 4 PCX-100 clamps and 2 PCL-100 clamps. ****** The "ICON" (Independent Control) system is the new top rack system from Pearl. It is height adjustable with 100 percent slip-proof square tubing. Pearl H2000 Eliminator Hi-Hat Stand All the flexibility you need! The Pearl H2000 Eliminator Hi-Hat Stand features the PosiLink Twin Cam Drive System: you determine the desired pedal response by changing among the 4 unique cams included. Rotating double-braced legs. Pearl H2000 Eliminator Hi-Hat Stand Features: Dual-chain Double-braced 2 rotatable legs 4 cams